This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1774491482 | 1388 | 76.9 | 40.2 | 66.6 | 0 |
| 1774491181 | 1390 | 77.2 | 40.8 | 67.7 | 0 |
| 1774490283 | 1391 | 78.5 | 40.8 | 68.7 | 0 |
| 1774489381 | 1391 | 79.6 | 41.3 | 69.6 | 0 |
| 1774489082 | 1391 | 80 | 41.9 | 69.9 | 0 |
| 1774487882 | 1391 | 82.8 | 42.9 | 71.3 | 0 |
| 1774487581 | 1391 | 83.5 | 44 | 72.4 | 0 |
| 1774486682 | 1391 | 85.3 | 45.1 | 75.5 | 0 |
| 1774485781 | 1391 | 86.8 | 45.6 | 76.4 | 0 |
| 1774485483 | 1391 | 87.2 | 45.6 | 77.3 | 0 |
| 1774484281 | 1390 | 88.7 | 46.2 | 79.2 | 0 |
| 1774483981 | 1390 | 89 | 46.7 | 79.5 | 0 |
| 1774483082 | 1391 | 89.5 | 47.2 | 80.4 | 0 |
| 1774482181 | 1391 | 89.9 | 47.2 | 80 | 0 |
| 1774481883 | 1391 | 90.4 | 47.8 | 80.5 | 0 |
| 1774480681 | 1391 | 91.7 | 47.8 | 82 | 0 |
| 1774480381 | 1391 | 92 | 48.3 | 82.4 | 0 |
| 1774479482 | 1391 | 92.5 | 48.3 | 83.5 | 0 |
| 1774478581 | 1391 | 92.5 | 48.3 | 83.6 | 0 |
| 1774478282 | 1391 | 92.5 | 48.3 | 83.6 | 0 |
| 1774477083 | 1391 | 92.6 | 48.9 | 83.8 | 0 |
| 1774476781 | 1391 | 92.4 | 48.9 | 83.3 | 0 |
| 1774475882 | 1391 | 92.5 | 48.3 | 83.3 | 0 |
| 1774474981 | 1391 | 92.4 | 48.9 | 83.2 | 0 |
| 1774474682 | 1390 | 92.3 | 48.9 | 83.1 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 1000
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)