This is the latest recevied telemetry packets stored in our database for station/object HS5TQA-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | BAR* | BAT* | SAT* |
|---|---|---|---|---|---|
| 1774485307 | 29.35 °C | 79.5 %RH | 1010 hPa | 13.31 V | 28 |
| 1774479345 | 29.52 °C | 79 %RH | 1008.9 hPa | 13.31 V | 29 |
| 1774473131 | 29.9 °C | 78.6 %RH | 1008 hPa | 13.31 V | 27 |
| 1774467045 | 30.52 °C | 77.4 %RH | 1007.9 hPa | 13.31 V | 29 |
| 1774454869 | 31.31 °C | 74 %RH | 1009.4 hPa | 13.4 V | 31 |
| 1774448784 | 30.71 °C | 70 %RH | 1008.9 hPa | 13.65 V | 31 |
| 1774445525 | 28.55 °C | 63.1 %RH | 1008.2 hPa | 13.7 V | 32 |
| 1774444890 | 31.01 °C | 70.9 %RH | 1008.1 hPa | 13.75 V | 30 |
| 1774439292 | 26.8 °C | 67.1 %RH | 1007 hPa | 13.57 V | 32 |
| 1774439153 | 26.94 °C | 66.9 %RH | 1007 hPa | 13.61 V | 32 |
| 1774438884 | 27.15 °C | 66.3 %RH | 1006.9 hPa | 13.76 V | 32 |
| 1774438199 | 27.72 °C | 66.4 %RH | 1006.9 hPa | 13.57 V | 31 |
| 1774437859 | 28.26 °C | 66.8 %RH | 1006.4 hPa | 13.77 V | 32 |
| 1774437664 | 28.76 °C | 69.2 %RH | 1007 hPa | 13.78 V | 31 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
BAR: 0, 0.1, 800
BAT: 0, 0.01, 0
SAT: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)