This is the latest recevied telemetry packets stored in our database for station/object SP2DRP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795100095 | 169 Count | 445 Count | 155 Count | 0 VDC | 0 VDC |
| 1795098295 | 153 Count | 410 Count | 140 Count | 0 VDC | 0 VDC |
| 1795096494 | 137 Count | 335 Count | 125 Count | 0 VDC | 0 VDC |
| 1795094693 | 126 Count | 301 Count | 115 Count | 0 VDC | 0 VDC |
| 1795092893 | 115 Count | 240 Count | 105 Count | 0 VDC | 0 VDC |
| 1795091092 | 96 Count | 206 Count | 87 Count | 0 VDC | 0 VDC |
| 1795089291 | 62 Count | 152 Count | 54 Count | 0 VDC | 0 VDC |
| 1795087491 | 50 Count | 124 Count | 43 Count | 0 VDC | 0 VDC |
| 1795085690 | 36 Count | 90 Count | 30 Count | 0 VDC | 0 VDC |
| 1795082111 | 11 Count | 27 Count | 11 Count | 0 VDC | 0 VDC |
| 1795080311 | 439 Count | 1029 Count | 393 Count | 0 VDC | 0 VDC |
| 1795078510 | 431 Count | 994 Count | 386 Count | 0 VDC | 0 VDC |
| 1795076709 | 416 Count | 963 Count | 372 Count | 0 VDC | 0 VDC |
| 1795074909 | 405 Count | 934 Count | 362 Count | 0 VDC | 0 VDC |
| 1795073098 | 392 Count | 909 Count | 350 Count | 0 VDC | 0 VDC |
| 1795071292 | 363 Count | 860 Count | 322 Count | 0 VDC | 0 VDC |
| 1795069491 | 350 Count | 822 Count | 310 Count | 0 VDC | 0 VDC |
| 1795067690 | 339 Count | 787 Count | 300 Count | 0 VDC | 0 VDC |
| 1795065890 | 326 Count | 758 Count | 288 Count | 0 VDC | 0 VDC |
| 1795064089 | 311 Count | 726 Count | 274 Count | 0 VDC | 0 VDC |
| 1795060494 | 282 Count | 665 Count | 251 Count | 0 VDC | 0 VDC |
| 1795058694 | 271 Count | 640 Count | 241 Count | 0 VDC | 0 VDC |
| 1795056893 | 260 Count | 616 Count | 231 Count | 0 VDC | 0 VDC |
| 1795055092 | 244 Count | 587 Count | 216 Count | 0 VDC | 0 VDC |
| 1795053291 | 235 Count | 565 Count | 208 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)