This is the latest recevied telemetry packets stored in our database for station/object SP1ZS-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795101085 | 104 Count | 226 Count | 62 Count | 4.11 VDC | 0 VDC |
| 1795100484 | 99 Count | 217 Count | 59 Count | 4.12 VDC | 0 VDC |
| 1795099883 | 91 Count | 201 Count | 53 Count | 4.11 VDC | 0 VDC |
| 1795099283 | 85 Count | 190 Count | 50 Count | 4.15 VDC | 0 VDC |
| 1795098682 | 81 Count | 180 Count | 48 Count | 4.13 VDC | 0 VDC |
| 1795098082 | 75 Count | 167 Count | 45 Count | 4.13 VDC | 0 VDC |
| 1795097481 | 69 Count | 159 Count | 41 Count | 4.13 VDC | 0 VDC |
| 1795096880 | 63 Count | 141 Count | 38 Count | 4.12 VDC | 0 VDC |
| 1795096280 | 57 Count | 122 Count | 34 Count | 4.11 VDC | 0 VDC |
| 1795095679 | 51 Count | 111 Count | 31 Count | 4.13 VDC | 0 VDC |
| 1795095078 | 44 Count | 100 Count | 26 Count | 4.15 VDC | 0 VDC |
| 1795094478 | 39 Count | 88 Count | 23 Count | 4.15 VDC | 0 VDC |
| 1795093877 | 35 Count | 81 Count | 22 Count | 4.11 VDC | 0 VDC |
| 1795093277 | 30 Count | 74 Count | 19 Count | 4.13 VDC | 0 VDC |
| 1795092676 | 21 Count | 57 Count | 13 Count | 4.13 VDC | 0 VDC |
| 1795092075 | 17 Count | 48 Count | 11 Count | 4.12 VDC | 0 VDC |
| 1795091475 | 10 Count | 25 Count | 7 Count | 4.13 VDC | 0 VDC |
| 1795090874 | 3 Count | 9 Count | 2 Count | 4.13 VDC | 0 VDC |
| 1795090273 | 502 Count | 1004 Count | 285 Count | 4.15 VDC | 0 VDC |
| 1795089673 | 497 Count | 994 Count | 283 Count | 4.12 VDC | 0 VDC |
| 1795089072 | 490 Count | 980 Count | 278 Count | 4.13 VDC | 0 VDC |
| 1795088469 | 484 Count | 967 Count | 275 Count | 4.13 VDC | 0 VDC |
| 1795087868 | 479 Count | 958 Count | 272 Count | 4.13 VDC | 0 VDC |
| 1795087267 | 468 Count | 944 Count | 268 Count | 4.14 VDC | 0 VDC |
| 1795086666 | 458 Count | 933 Count | 265 Count | 4.12 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)