This is the latest recevied telemetry packets stored in our database for station/object YB1CHAN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795101052 | 31 °C | 99 %RH | 0 | 0 | 0 |
| 1795099276 | 31 °C | 99 %RH | 0 | 0 | 0 |
| 1795097498 | 30 °C | 99 %RH | 0 | 0 | 0 |
| 1795095722 | 30 °C | 99 %RH | 0 | 0 | 0 |
| 1795093945 | 30 °C | 99 %RH | 0 | 0 | 0 |
| 1795092168 | 30 °C | 99 %RH | 0 | 0 | 0 |
| 1795090390 | 30 °C | 99 %RH | 0 | 0 | 0 |
| 1795088614 | 30 °C | 99 %RH | 0 | 0 | 0 |
| 1795086837 | 30 °C | 99 %RH | 0 | 0 | 0 |
| 1795085060 | 30 °C | 99 %RH | 0 | 0 | 0 |
| 1795083283 | 29 °C | 99 %RH | 0 | 0 | 0 |
| 1795081506 | 29 °C | 99 %RH | 0 | 0 | 0 |
| 1795079729 | 30 °C | 99 %RH | 0 | 0 | 0 |
| 1795077952 | 31 °C | 99 %RH | 0 | 0 | 0 |
| 1795076175 | 31 °C | 99 %RH | 0 | 0 | 0 |
| 1795074398 | 31 °C | 99 %RH | 0 | 0 | 0 |
| 1795072621 | 31 °C | 98 %RH | 0 | 0 | 0 |
| 1795070844 | 31 °C | 86 %RH | 0 | 0 | 0 |
| 1795069067 | 33 °C | 99 %RH | 0 | 0 | 0 |
| 1795067290 | 33 °C | 91 %RH | 0 | 0 | 0 |
| 1795065513 | 32 °C | 85 %RH | 0 | 0 | 0 |
| 1795063736 | 31 °C | 97 %RH | 0 | 0 | 0 |
| 1795061959 | 31 °C | 90 %RH | 0 | 0 | 0 |
| 1795060182 | 33 °C | 78 %RH | 0 | 0 | 0 |
| 1795058405 | 33 °C | 80 %RH | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)