This is the latest recevied telemetry packets stored in our database for station/object PINAL. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | RX_rate* | RelRate* | DrpRate* |
|---|---|---|---|---|---|
| 1795100545 | 4.27 VDC | 13.08 VDC | 408 pkt/h | 90 pkt/h | 318 pkt/h |
| 1795099945 | 4.27 VDC | 13.08 VDC | 510 pkt/h | 102 pkt/h | 408 pkt/h |
| 1795099345 | 4.27 VDC | 13.06 VDC | 360 pkt/h | 78 pkt/h | 282 pkt/h |
| 1795098745 | 4.27 VDC | 13.06 VDC | 414 pkt/h | 96 pkt/h | 318 pkt/h |
| 1795098144 | 4.27 VDC | 13.06 VDC | 726 pkt/h | 156 pkt/h | 570 pkt/h |
| 1795097545 | 4.27 VDC | 13.06 VDC | 678 pkt/h | 144 pkt/h | 534 pkt/h |
| 1795096944 | 4.27 VDC | 13.06 VDC | 912 pkt/h | 192 pkt/h | 720 pkt/h |
| 1795096345 | 4.27 VDC | 13.08 VDC | 719 pkt/h | 171 pkt/h | 548 pkt/h |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)