This is the latest recevied telemetry packets stored in our database for station/object HP2PCO-14. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795103501 | 0 Pkt/10m | 0 Pkt/10m | 4.23 Volt | 0 | 0 |
| 1795102297 | 0 Pkt/10m | 0 Pkt/10m | 4.08 Volt | 0 | 0 |
| 1795101092 | 0 Pkt/10m | 0 Pkt/10m | 4.27 Volt | 0 | 0 |
| 1795099888 | 0 Pkt/10m | 0 Pkt/10m | 4.25 Volt | 0 | 0 |
| 1795098684 | 0 Pkt/10m | 0 Pkt/10m | 4.27 Volt | 0 | 0 |
| 1795097480 | 0 Pkt/10m | 0 Pkt/10m | 4.12 Volt | 0 | 0 |
| 1795096276 | 0 Pkt/10m | 0 Pkt/10m | 4.16 Volt | 0 | 0 |
| 1795095072 | 0 Pkt/10m | 0 Pkt/10m | 4.16 Volt | 0 | 0 |
| 1795093868 | 0 Pkt/10m | 0 Pkt/10m | 4.14 Volt | 0 | 0 |
| 1795092663 | 0 Pkt/10m | 0 Pkt/10m | 4.14 Volt | 0 | 0 |
| 1795091459 | 0 Pkt/10m | 0 Pkt/10m | 4.12 Volt | 0 | 0 |
| 1795090255 | 0 Pkt/10m | 0 Pkt/10m | 4.08 Volt | 0 | 0 |
| 1795089051 | 0 Pkt/10m | 0 Pkt/10m | 4.25 Volt | 0 | 0 |
| 1795087847 | 0 Pkt/10m | 0 Pkt/10m | 4.27 Volt | 0 | 0 |
| 1795086643 | 0 Pkt/10m | 0 Pkt/10m | 4.14 Volt | 0 | 0 |
| 1795085438 | 0 Pkt/10m | 0 Pkt/10m | 4.12 Volt | 0 | 0 |
| 1795084235 | 0 Pkt/10m | 0 Pkt/10m | 4.14 Volt | 0 | 0 |
| 1795083030 | 0 Pkt/10m | 0 Pkt/10m | 4.23 Volt | 0 | 0 |
| 1795081826 | 0 Pkt/10m | 0 Pkt/10m | 4.21 Volt | 0 | 0 |
| 1795080622 | 0 Pkt/10m | 0 Pkt/10m | 4.23 Volt | 0 | 0 |
| 1795079445 | 0 Pkt/10m | 0 Pkt/10m | 4.17 Volt | 0 | 0 |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)