This is the latest recevied telemetry packets stored in our database for station/object SP9WJ-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | current* | temp* | humidity* | v batt* | v cpu* |
|---|---|---|---|---|---|
| 1795100315 | 2.12 mA | 10 C | 66 % | 1.46 V | 3.29 V |
| 1795099403 | 1.3 mA | 10 C | 66 % | 1.46 V | 3.29 V |
| 1795098470 | 1.73 mA | 11 C | 65 % | 1.46 V | 3.29 V |
| 1795097546 | 1.55 mA | 11 C | 64 % | 1.48 V | 3.29 V |
| 1795096623 | 1.3 mA | 11 C | 63 % | 1.48 V | 3.29 V |
| 1795095700 | 1.27 mA | 11 C | 63 % | 1.48 V | 3.29 V |
| 1795094777 | 1.62 mA | 11 C | 62 % | 1.48 V | 3.29 V |
| 1795093854 | 1.29 mA | 12 C | 62 % | 1.48 V | 3.29 V |
| 1795092930 | 0.86 mA | 12 C | 61 % | 1.48 V | 3.29 V |
| 1795092007 | 2.59 mA | 12 C | 60 % | 1.51 V | 3.29 V |
| 1795091084 | 1.15 mA | 12 C | 60 % | 1.51 V | 3.29 V |
| 1795090170 | 1.37 mA | 12 C | 59 % | 1.51 V | 3.29 V |
| 1795089237 | 1.88 mA | 13 C | 58 % | 1.51 V | 3.29 V |
| 1795088313 | 0.97 mA | 13 C | 56 % | 1.51 V | 3.29 V |
| 1795087390 | 2.97 mA | 13 C | 57 % | 1.53 V | 3.29 V |
| 1795086466 | 1.27 mA | 13 C | 56 % | 1.53 V | 3.29 V |
| 1795085554 | 1.93 mA | 14 C | 55 % | 1.53 V | 3.29 V |
| 1795084618 | 2.59 mA | 14 C | 55 % | 1.55 V | 3.29 V |
| 1795083694 | 1.96 mA | 14 C | 56 % | 1.55 V | 3.29 V |
| 1795082770 | 1.29 mA | 13 C | 57 % | 1.53 V | 3.29 V |
| 1795081847 | 2.18 mA | 13 C | 58 % | 1.53 V | 3.29 V |
| 1795080923 | 1.55 mA | 13 C | 59 % | 1.53 V | 3.29 V |
| 1795079999 | 1.8 mA | 13 C | 59 % | 1.53 V | 3.29 V |
| 1795079075 | 1.76 mA | 12 C | 61 % | 1.51 V | 3.29 V |
| 1795078152 | 1.16 mA | 11 C | 66 % | 1.48 V | 3.29 V |
*Used Equation Coefficients:
current: 0, 0.01569, 0
temp: 0, 1, -128
humidity: 0, 1, 0
v batt: 0, 0.02353, 0
v cpu: 0, 0.01569, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)