This is the latest recevied telemetry packets stored in our database for station/object HA5OI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795102336 | 416 | 733 | 5468 | 7948 | 0 |
| 1795101429 | 416 | 732 | 5431 | 7978 | 0 |
| 1795100523 | 416 | 731 | 5489 | 7927 | 0 |
| 1795099616 | 416 | 732 | 5472 | 7950 | 0 |
| 1795098710 | 416 | 732 | 5453 | 7965 | 0 |
| 1795097803 | 416 | 732 | 5457 | 7936 | 0 |
| 1795096897 | 416 | 732 | 5411 | 8023 | 0 |
| 1795096556 | 416 | 732 | 5352 | 8023 | 0 |
| 1795096519 | 416 | 732 | 5352 | 8023 | 0 |
| 1795096500 | 416 | 732 | 5239 | 8024 | 0 |
| 1795096415 | 416 | 732 | 5254 | 8021 | 0 |
| 1795096289 | 416 | 732 | 5233 | 8035 | 0 |
| 1795096270 | 416 | 733 | 5366 | 8034 | 0 |
| 1795096252 | 416 | 733 | 5366 | 8033 | 0 |
| 1795096219 | 416 | 733 | 5366 | 8030 | 0 |
| 1795096174 | 416 | 733 | 5434 | 8010 | 0 |
| 1795096047 | 416 | 733 | 5459 | 7958 | 0 |
| 1795096029 | 416 | 733 | 5435 | 7959 | 0 |
| 1795096010 | 416 | 733 | 5435 | 7959 | 0 |
| 1795095884 | 416 | 732 | 5414 | 7951 | 0 |
| 1795095856 | 416 | 732 | 5414 | 7952 | 0 |
| 1795095828 | 416 | 732 | 5449 | 7952 | 0 |
| 1795095682 | 416 | 732 | 5438 | 7946 | 0 |
| 1795095623 | 416 | 732 | 5431 | 7949 | 0 |
| 1795095396 | 416 | 732 | 5433 | 7943 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)