This is the latest recevied telemetry packets stored in our database for station/object IV3CGJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795098576 | 422 | 0 | 0 | 0 | 0 |
| 1795097675 | 422 | 0 | 0 | 0 | 0 |
| 1795096775 | 425 | 0 | 0 | 0 | 0 |
| 1795095875 | 427 | 0 | 0 | 0 | 0 |
| 1795094974 | 429 | 0 | 0 | 0 | 0 |
| 1795094073 | 425 | 0 | 0 | 0 | 0 |
| 1795093172 | 424 | 0 | 0 | 0 | 0 |
| 1795092271 | 426 | 0 | 0 | 0 | 0 |
| 1795091370 | 423 | 0 | 0 | 0 | 0 |
| 1795090469 | 429 | 0 | 0 | 0 | 0 |
| 1795089569 | 429 | 0 | 0 | 0 | 0 |
| 1795088668 | 422 | 0 | 0 | 0 | 0 |
| 1795087767 | 422 | 0 | 0 | 0 | 0 |
| 1795086866 | 425 | 0 | 0 | 0 | 0 |
| 1795085966 | 425 | 0 | 0 | 0 | 0 |
| 1795085066 | 423 | 0 | 0 | 0 | 0 |
| 1795084165 | 427 | 0 | 0 | 0 | 0 |
| 1795083265 | 424 | 0 | 0 | 0 | 0 |
| 1795082364 | 427 | 0 | 0 | 0 | 0 |
| 1795081464 | 425 | 0 | 0 | 0 | 0 |
| 1795080562 | 425 | 0 | 0 | 0 | 0 |
| 1795079662 | 428 | 0 | 0 | 0 | 0 |
| 1795078761 | 428 | 0 | 0 | 0 | 0 |
| 1795076960 | 426 | 0 | 0 | 0 | 0 |
| 1795076059 | 422 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)