This is the latest recevied telemetry packets stored in our database for station/object KD8NJV-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795127951 | 408 | 775 | 0 | 0 | 0 |
| 1795126155 | 409 | 775 | 0 | 0 | 0 |
| 1795124360 | 410 | 775 | 0 | 0 | 0 |
| 1795122564 | 411 | 773 | 0 | 0 | 0 |
| 1795120769 | 464 | 770 | 0 | 0 | 0 |
| 1795120743 | 465 | 769 | 0 | 0 | 0 |
| 1795120695 | 464 | 769 | 0 | 0 | 0 |
| 1795120605 | 461 | 770 | 0 | 0 | 0 |
| 1795120478 | 465 | 766 | 0 | 0 | 0 |
| 1795120473 | 463 | 767 | 0 | 0 | 0 |
| 1795119643 | 467 | 761 | 0 | 0 | 0 |
| 1795119617 | 465 | 761 | 0 | 0 | 0 |
| 1795119612 | 461 | 761 | 0 | 0 | 0 |
| 1795119590 | 465 | 761 | 0 | 0 | 0 |
| 1795118907 | 404 | 761 | 0 | 0 | 0 |
| 1795117112 | 404 | 761 | 0 | 0 | 0 |
| 1795115317 | 405 | 762 | 0 | 0 | 0 |
| 1795113521 | 405 | 762 | 0 | 0 | 0 |
| 1795111725 | 406 | 763 | 0 | 0 | 0 |
| 1795109930 | 406 | 763 | 0 | 0 | 0 |
| 1795108135 | 407 | 763 | 0 | 0 | 0 |
| 1795106339 | 409 | 764 | 0 | 0 | 0 |
| 1795104544 | 408 | 765 | 0 | 0 | 0 |
| 1795102748 | 408 | 766 | 0 | 0 | 0 |
| 1795100953 | 410 | 766 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)