This is the latest recevied telemetry packets stored in our database for station/object LU6EEG-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795109276 | 733 Count | 965 Count | 622 Count | 4.13 VDC | 0 VDC |
| 1795108373 | 727 Count | 944 Count | 617 Count | 4.13 VDC | 0 VDC |
| 1795107469 | 722 Count | 919 Count | 613 Count | 4.14 VDC | 0 VDC |
| 1795106566 | 715 Count | 906 Count | 607 Count | 4.13 VDC | 0 VDC |
| 1795105663 | 707 Count | 894 Count | 600 Count | 4.13 VDC | 0 VDC |
| 1795104760 | 700 Count | 882 Count | 594 Count | 4.13 VDC | 0 VDC |
| 1795103856 | 694 Count | 872 Count | 589 Count | 4.13 VDC | 0 VDC |
| 1795102953 | 687 Count | 859 Count | 583 Count | 4.13 VDC | 0 VDC |
| 1795102050 | 681 Count | 849 Count | 578 Count | 4.13 VDC | 0 VDC |
| 1795101147 | 675 Count | 838 Count | 573 Count | 4.13 VDC | 0 VDC |
| 1795100244 | 664 Count | 827 Count | 563 Count | 4.13 VDC | 0 VDC |
| 1795099341 | 644 Count | 804 Count | 544 Count | 4.13 VDC | 0 VDC |
| 1795098438 | 622 Count | 778 Count | 523 Count | 4.13 VDC | 0 VDC |
| 1795097535 | 614 Count | 764 Count | 516 Count | 4.13 VDC | 0 VDC |
| 1795096632 | 592 Count | 741 Count | 495 Count | 4.13 VDC | 0 VDC |
| 1795095729 | 575 Count | 720 Count | 479 Count | 4.13 VDC | 0 VDC |
| 1795094826 | 567 Count | 712 Count | 472 Count | 4.13 VDC | 0 VDC |
| 1795093923 | 548 Count | 690 Count | 454 Count | 4.13 VDC | 0 VDC |
| 1795093018 | 542 Count | 684 Count | 449 Count | 4.13 VDC | 0 VDC |
| 1795092115 | 536 Count | 677 Count | 444 Count | 4.13 VDC | 0 VDC |
| 1795091212 | 531 Count | 672 Count | 440 Count | 4.13 VDC | 0 VDC |
| 1795090309 | 520 Count | 652 Count | 430 Count | 4.13 VDC | 0 VDC |
| 1795089406 | 515 Count | 647 Count | 426 Count | 4.13 VDC | 0 VDC |
| 1795088503 | 509 Count | 640 Count | 421 Count | 4.13 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)