This is the latest recevied telemetry packets stored in our database for station/object NS6X. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795106818 | 10 | 716 | 419 | 7 | 0 |
| 1795103818 | 10 | 709 | 419 | 7 | 0 |
| 1795100818 | 11 | 713 | 419 | 7 | 0 |
| 1795097818 | 12 | 713 | 423 | 8 | 0 |
| 1795094818 | 11 | 710 | 424 | 8 | 0 |
| 1795091818 | 10 | 707 | 423 | 7 | 0 |
| 1795088818 | 12 | 707 | 419 | 8 | 0 |
| 1795085818 | 11 | 710 | 419 | 8 | 0 |
| 1795082818 | 11 | 711 | 417 | 7 | 0 |
| 1795079818 | 12 | 721 | 423 | 7 | 0 |
| 1795076818 | 11 | 730 | 423 | 7 | 0 |
| 1795073818 | 11 | 735 | 423 | 6 | 0 |
| 1795070818 | 11 | 731 | 419 | 7 | 0 |
| 1795067964 | 10 | 760 | 422 | 20 | 0 |
| 1795067665 | 12 | 751 | 423 | 23 | 0 |
| 1795051054 | 11 | 790 | 422 | 24 | 0 |
| 1795049710 | 12 | 813 | 421 | 15 | 0 |
| 1795049515 | 12 | 804 | 421 | 4 | 0 |
| 1795047449 | 12 | 800 | 417 | 8 | 0 |
| 1795044438 | 12 | 815 | 423 | 8 | 0 |
| 1795041438 | 12 | 812 | 422 | 8 | 0 |
| 1795039758 | 12 | 825 | 422 | 6 | 0 |
| 1795039275 | 12 | 830 | 422 | 9 | 0 |
| 1795036073 | 11 | 886 | 421 | 35 | 0 |
| 1795035672 | 12 | 880 | 421 | 29 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)