This is the latest recevied telemetry packets stored in our database for station/object 3Z2T-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795117206 | 63 | 908 | 0 | 373 | 0 |
| 1795113608 | 61 | 882 | 0 | 374 | 0 |
| 1795111808 | 60 | 868 | 0 | 374 | 0 |
| 1795110008 | 59 | 848 | 0 | 374 | 0 |
| 1795108208 | 58 | 828 | 0 | 374 | 0 |
| 1795106409 | 57 | 810 | 0 | 374 | 0 |
| 1795104609 | 56 | 795 | 0 | 374 | 0 |
| 1795102810 | 55 | 767 | 0 | 374 | 0 |
| 1795101010 | 54 | 740 | 0 | 374 | 0 |
| 1795099211 | 53 | 727 | 0 | 374 | 0 |
| 1795097411 | 52 | 707 | 0 | 374 | 0 |
| 1795095611 | 51 | 689 | 0 | 374 | 35 |
| 1795093812 | 50 | 672 | 0 | 374 | 189 |
| 1795092011 | 49 | 661 | 0 | 374 | 188 |
| 1795090213 | 48 | 651 | 0 | 374 | 188 |
| 1795088413 | 47 | 641 | 0 | 374 | 188 |
| 1795086613 | 46 | 620 | 0 | 374 | 188 |
| 1795084815 | 45 | 609 | 0 | 374 | 128 |
| 1795083015 | 44 | 599 | 0 | 374 | 167 |
| 1795081216 | 43 | 589 | 0 | 374 | 165 |
| 1795079416 | 42 | 551 | 0 | 374 | 49 |
| 1795077616 | 41 | 539 | 0 | 374 | 52 |
| 1795075817 | 40 | 522 | 0 | 374 | 0 |
| 1795074019 | 39 | 510 | 0 | 374 | 0 |
| 1795072219 | 38 | 498 | 0 | 374 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)