This is the latest recevied telemetry packets stored in our database for station/object N7UV-44. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | RX_rate* | RelRate* | DrpRate* |
|---|---|---|---|---|---|
| 1795123732 | 4.14 VDC | 13.3 VDC | 456 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795122832 | 4.13 VDC | 13.32 VDC | 544 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795121932 | 4.13 VDC | 13.3 VDC | 424 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795121031 | 4.14 VDC | 13.3 VDC | 484 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795120131 | 4.13 VDC | 13.28 VDC | 368 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795119231 | 4.14 VDC | 13.3 VDC | 628 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795118331 | 4.13 VDC | 13.3 VDC | 1284 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795117430 | 4.13 VDC | 13.3 VDC | 1108 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795116530 | 4.14 VDC | 13.28 VDC | 1140 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795115630 | 4.13 VDC | 13.3 VDC | 912 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795114729 | 4.13 VDC | 13.26 VDC | 1039 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795113828 | 4.14 VDC | 13.28 VDC | 1064 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795112928 | 4.14 VDC | 13.28 VDC | 872 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795112028 | 4.14 VDC | 13.28 VDC | 1052 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795111128 | 4.14 VDC | 13.26 VDC | 664 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795110228 | 4.13 VDC | 13.26 VDC | 816 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795109327 | 4.12 VDC | 13.28 VDC | 404 pkt/h | 0 pkt/h | 0 pkt/h |
| 1795108427 | 4.13 VDC | 13.22 VDC | 367 pkt/h | 0 pkt/h | 0 pkt/h |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
RX_rate: 0, 1, 0
RelRate: 0, 1, 0
DrpRate: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)