This is the latest recevied telemetry packets stored in our database for station/object IT9IRS-PA. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795125152 | 31 Count | 361 Count | 0 Count | 0 VDC | 0 VDC |
| 1795123942 | 29 Count | 345 Count | 0 Count | 0 VDC | 0 VDC |
| 1795123338 | 28 Count | 332 Count | 0 Count | 0 VDC | 0 VDC |
| 1795120919 | 24 Count | 302 Count | 0 Count | 0 VDC | 0 VDC |
| 1795120314 | 23 Count | 284 Count | 0 Count | 0 VDC | 0 VDC |
| 1795119105 | 21 Count | 268 Count | 0 Count | 0 VDC | 0 VDC |
| 1795117291 | 18 Count | 229 Count | 0 Count | 0 VDC | 0 VDC |
| 1795116081 | 16 Count | 189 Count | 0 Count | 0 VDC | 0 VDC |
| 1795115477 | 15 Count | 166 Count | 0 Count | 0 VDC | 0 VDC |
| 1795067768 | 16 Count | 152 Count | 0 Count | 0 VDC | 0 VDC |
| 1795065953 | 13 Count | 123 Count | 0 Count | 0 VDC | 0 VDC |
| 1795062930 | 8 Count | 78 Count | 0 Count | 0 VDC | 0 VDC |
| 1795061721 | 6 Count | 65 Count | 0 Count | 0 VDC | 0 VDC |
| 1795060511 | 4 Count | 42 Count | 0 Count | 0 VDC | 0 VDC |
| 1795058697 | 1 Count | 14 Count | 0 Count | 0 VDC | 0 VDC |
| 1795056883 | 87 Count | 996 Count | 0 Count | 0 VDC | 0 VDC |
| 1795055673 | 85 Count | 982 Count | 0 Count | 0 VDC | 0 VDC |
| 1795055069 | 84 Count | 972 Count | 0 Count | 0 VDC | 0 VDC |
| 1795053859 | 82 Count | 958 Count | 0 Count | 0 VDC | 0 VDC |
| 1795052650 | 80 Count | 939 Count | 0 Count | 0 VDC | 0 VDC |
| 1795050836 | 77 Count | 905 Count | 0 Count | 0 VDC | 0 VDC |
| 1795049626 | 75 Count | 883 Count | 0 Count | 0 VDC | 0 VDC |
| 1795047812 | 72 Count | 858 Count | 0 Count | 0 VDC | 0 VDC |
| 1795044789 | 67 Count | 811 Count | 0 Count | 0 VDC | 0 VDC |
| 1795044184 | 66 Count | 794 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)