This is the latest recevied telemetry packets stored in our database for station/object XE2ERA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795136139 | 38 Count | 66 Count | 26 Count | 3.9 VDC | 0.08 VDC |
| 1795134331 | 31 Count | 57 Count | 21 Count | 3.9 VDC | 0.08 VDC |
| 1795132520 | 25 Count | 46 Count | 17 Count | 3.9 VDC | 0.08 VDC |
| 1795131615 | 22 Count | 40 Count | 15 Count | 3.91 VDC | 0.08 VDC |
| 1795130711 | 19 Count | 33 Count | 13 Count | 3.92 VDC | 0.08 VDC |
| 1795129807 | 17 Count | 30 Count | 12 Count | 3.93 VDC | 0.08 VDC |
| 1795128903 | 14 Count | 23 Count | 10 Count | 3.93 VDC | 0.08 VDC |
| 1795127999 | 11 Count | 19 Count | 8 Count | 3.91 VDC | 0.08 VDC |
| 1795127095 | 8 Count | 13 Count | 6 Count | 3.92 VDC | 0.08 VDC |
| 1795126190 | 5 Count | 9 Count | 4 Count | 3.92 VDC | 0.08 VDC |
| 1795125286 | 2 Count | 5 Count | 2 Count | 3.92 VDC | 0.08 VDC |
| 1795124391 | 795 Count | 1001 Count | 363 Count | 3.91 VDC | 0.08 VDC |
| 1795123478 | 792 Count | 994 Count | 361 Count | 3.91 VDC | 0.08 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)