This is the latest recevied telemetry packets stored in our database for station/object KF6YGK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795126994 | 412 | 596 | 0 | 0 | 0 |
| 1795123394 | 413 | 596 | 0 | 0 | 0 |
| 1795121593 | 414 | 596 | 0 | 0 | 0 |
| 1795119793 | 416 | 596 | 0 | 0 | 0 |
| 1795117993 | 419 | 596 | 0 | 0 | 0 |
| 1795116192 | 425 | 597 | 0 | 0 | 0 |
| 1795112590 | 427 | 596 | 0 | 0 | 0 |
| 1795108989 | 412 | 596 | 0 | 0 | 0 |
| 1795107189 | 413 | 596 | 0 | 0 | 0 |
| 1795105389 | 413 | 596 | 0 | 0 | 0 |
| 1795103588 | 413 | 595 | 0 | 0 | 0 |
| 1795099989 | 413 | 595 | 0 | 0 | 0 |
| 1795098189 | 413 | 595 | 0 | 0 | 0 |
| 1795096388 | 413 | 595 | 0 | 0 | 0 |
| 1795094588 | 414 | 595 | 0 | 0 | 0 |
| 1795092788 | 418 | 597 | 0 | 0 | 0 |
| 1795090988 | 415 | 594 | 0 | 0 | 0 |
| 1795089187 | 416 | 595 | 0 | 0 | 0 |
| 1795087387 | 416 | 594 | 0 | 0 | 0 |
| 1795085586 | 417 | 594 | 0 | 0 | 0 |
| 1795083785 | 417 | 594 | 0 | 0 | 0 |
| 1795081984 | 418 | 594 | 0 | 0 | 0 |
| 1795080184 | 418 | 594 | 0 | 0 | 0 |
| 1795072981 | 419 | 595 | 0 | 0 | 0 |
| 1795071181 | 419 | 595 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)