This is the latest recevied telemetry packets stored in our database for station/object WD8ED-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | Celsius* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795112846 | 4.29 VDC | 19.8 C | 1014.88 hPa | 0 | 0 |
| 1795111942 | 4.26 VDC | 20.3 C | 1017.5 hPa | 0 | 0 |
| 1795111039 | 4.3 VDC | 21.2 C | 1020 hPa | 0 | 0 |
| 1795110136 | 4.25 VDC | 20.8 C | 1017.63 hPa | 0 | 0 |
| 1795109233 | 4.28 VDC | 20.2 C | 1018.63 hPa | 0 | 0 |
| 1795108330 | 4.28 VDC | 21.8 C | 1019.63 hPa | 0 | 0 |
| 1795107427 | 4.26 VDC | 19.6 C | 1019.63 hPa | 0 | 0 |
| 1795106524 | 4.29 VDC | 21.2 C | 1020 hPa | 0 | 0 |
| 1795105621 | 4.29 VDC | 18.3 C | 1017.5 hPa | 0 | 0 |
| 1795104718 | 4.28 VDC | 17 C | 1020.75 hPa | 0 | 0 |
| 1795103815 | 4.27 VDC | 15.5 C | 1022.63 hPa | 0 | 0 |
| 1795102912 | 4.28 VDC | 15.1 C | 1016.5 hPa | 0 | 0 |
| 1795102008 | 4.31 VDC | 14 C | 1021.75 hPa | 0 | 0 |
| 1795101106 | 4.32 VDC | 13.7 C | 1023.63 hPa | 0 | 0 |
| 1795100203 | 4.3 VDC | 12.2 C | 1024.38 hPa | 0 | 0 |
| 1795099300 | 4.32 VDC | 11.1 C | 1023.5 hPa | 0 | 0 |
| 1795098397 | 4.28 VDC | 10.2 C | 1021.25 hPa | 0 | 0 |
| 1795097494 | 4.29 VDC | 9.5 C | 1024.5 hPa | 0 | 0 |
| 1795096591 | 4.34 VDC | 9 C | 1018.63 hPa | 0 | 0 |
| 1795095688 | 4.28 VDC | 8.3 C | 1019.75 hPa | 0 | 0 |
| 1795094785 | 4.3 VDC | 7.8 C | 1024.88 hPa | 0 | 0 |
| 1795093882 | 4.27 VDC | 8 C | 1014.75 hPa | 0 | 0 |
| 1795092980 | 4.27 VDC | 7.5 C | 1019.13 hPa | 0 | 0 |
| 1795092076 | 4.32 VDC | 7.6 C | 1023.63 hPa | 0 | 0 |
| 1795091173 | 4.32 VDC | 7.4 C | 1020.63 hPa | 0 | 0 |
*Used Equation Coefficients:
Voltage: 0, 0.01, 0
Celsius: 0, 0.1, -50
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)