This is the latest recevied telemetry packets stored in our database for station/object KA6ACE-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795062870 | 457 | 620 | 0 | 0 | 0 |
| 1795062750 | 454 | 619 | 0 | 0 | 0 |
| 1795062392 | 456 | 613 | 0 | 0 | 0 |
| 1795061559 | 454 | 621 | 0 | 0 | 0 |
| 1795060603 | 454 | 624 | 0 | 0 | 0 |
| 1795060004 | 460 | 621 | 0 | 0 | 0 |
| 1795059885 | 458 | 620 | 0 | 0 | 0 |
| 1795059765 | 457 | 620 | 0 | 0 | 0 |
| 1795059646 | 455 | 619 | 0 | 0 | 0 |
| 1795059526 | 456 | 618 | 0 | 0 | 0 |
| 1795059406 | 452 | 617 | 0 | 0 | 0 |
| 1795059287 | 453 | 618 | 0 | 0 | 0 |
| 1795058947 | 458 | 618 | 0 | 0 | 0 |
| 1795058707 | 450 | 617 | 0 | 0 | 0 |
| 1795058588 | 459 | 618 | 0 | 0 | 0 |
| 1795058469 | 459 | 616 | 0 | 0 | 0 |
| 1795058348 | 458 | 615 | 0 | 0 | 0 |
| 1795057991 | 453 | 613 | 0 | 0 | 0 |
| 1795057871 | 454 | 612 | 0 | 0 | 0 |
| 1795057267 | 458 | 607 | 0 | 0 | 0 |
| 1795052291 | 456 | 610 | 0 | 0 | 0 |
| 1795052172 | 457 | 609 | 0 | 0 | 0 |
| 1795052052 | 457 | 609 | 0 | 0 | 0 |
| 1795051933 | 458 | 608 | 0 | 0 | 0 |
| 1795051813 | 451 | 607 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)