This is the latest recevied telemetry packets stored in our database for station/object BG2VZP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795100185 | 7 | 112 | 1010 | 1152 | 0 |
| 1795097159 | 6 | 118 | 1010 | 1152 | 0 |
| 1795094127 | 5 | 106 | 1010 | 1152 | 0 |
| 1795091094 | 7 | 99 | 1010 | 1152 | 0 |
| 1795088064 | 7 | 136 | 1010 | 1149 | 0 |
| 1795085020 | 7 | 129 | 1009 | 1152 | 0 |
| 1795081985 | 7 | 140 | 1009 | 1152 | 0 |
| 1795078952 | 7 | 135 | 1009 | 1155 | 0 |
| 1795075919 | 6 | 136 | 1008 | 1152 | 0 |
| 1795072890 | 8 | 138 | 1008 | 1152 | 0 |
| 1795066793 | 5 | 205 | 1009 | 1152 | 0 |
| 1795063727 | 5 | 199 | 1009 | 1152 | 0 |
| 1795060663 | 6 | 155 | 1009 | 1152 | 0 |
| 1795057572 | 7 | 142 | 1010 | 1152 | 0 |
| 1795054529 | 7 | 149 | 1010 | 1152 | 0 |
| 1795051443 | 8 | 142 | 1010 | 1152 | 0 |
| 1795048378 | 7 | 142 | 1010 | 1152 | 0 |
| 1795045358 | 6 | 137 | 1010 | 1155 | 0 |
| 1795042300 | 5 | 136 | 1010 | 1152 | 0 |
| 1795039259 | 6 | 137 | 1010 | 1152 | 0 |
| 1795036245 | 7 | 135 | 1009 | 1152 | 0 |
| 1795033217 | 5 | 132 | 1010 | 1152 | 0 |
| 1795030189 | 6 | 133 | 1010 | 1149 | 0 |
| 1795027160 | 6 | 134 | 1010 | 1155 | 0 |
| 1795024146 | 5 | 136 | 1010 | 1152 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)