This is the latest recevied telemetry packets stored in our database for station/object SQ2CPA-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795110007 | 130 Count | 510 Count | 112 Count | 4.08 VDC | 0 VDC |
| 1795108210 | 126 Count | 506 Count | 109 Count | 4.08 VDC | 0 VDC |
| 1795106413 | 122 Count | 502 Count | 106 Count | 4.08 VDC | 0 VDC |
| 1795104617 | 118 Count | 498 Count | 103 Count | 4.08 VDC | 0 VDC |
| 1795099224 | 107 Count | 487 Count | 95 Count | 4.08 VDC | 0.9 VDC |
| 1795097426 | 101 Count | 450 Count | 90 Count | 4.08 VDC | 4.46 VDC |
| 1795095626 | 94 Count | 398 Count | 84 Count | 4.08 VDC | 4.44 VDC |
| 1795093828 | 90 Count | 355 Count | 81 Count | 4.09 VDC | 4.44 VDC |
| 1795092029 | 86 Count | 315 Count | 78 Count | 4.1 VDC | 4.42 VDC |
| 1795090230 | 73 Count | 253 Count | 66 Count | 4.09 VDC | 4.42 VDC |
| 1795088432 | 54 Count | 186 Count | 48 Count | 4.06 VDC | 5.52 VDC |
| 1795086633 | 41 Count | 131 Count | 36 Count | 4.07 VDC | 5.52 VDC |
| 1795084836 | 28 Count | 83 Count | 24 Count | 4.08 VDC | 5.52 VDC |
| 1795083038 | 19 Count | 50 Count | 16 Count | 4.07 VDC | 5.52 VDC |
| 1795081243 | 16 Count | 47 Count | 14 Count | 4.08 VDC | 4.4 VDC |
| 1795079446 | 12 Count | 43 Count | 11 Count | 4.08 VDC | 4.4 VDC |
| 1795077651 | 7 Count | 33 Count | 7 Count | 4.06 VDC | 4.42 VDC |
| 1795075853 | 1004 Count | 1011 Count | 695 Count | 4.06 VDC | 4.42 VDC |
| 1795066868 | 981 Count | 968 Count | 677 Count | 4.06 VDC | 0 VDC |
| 1795065070 | 977 Count | 964 Count | 674 Count | 4.06 VDC | 0 VDC |
| 1795063274 | 973 Count | 960 Count | 671 Count | 4.06 VDC | 0 VDC |
| 1795061476 | 969 Count | 956 Count | 668 Count | 4.06 VDC | 0 VDC |
| 1795059680 | 966 Count | 953 Count | 666 Count | 4.06 VDC | 0 VDC |
| 1795057884 | 962 Count | 949 Count | 663 Count | 4.06 VDC | 0 VDC |
| 1795056087 | 958 Count | 945 Count | 660 Count | 4.06 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)