This is the latest recevied telemetry packets stored in our database for station/object YB1LZ-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp.* | Humidity* | Pressure* | AllCount* | Value5* |
|---|---|---|---|---|---|
| 1795101083 | 30 °C | 50 %RH | 939 hPa | 0 Pkts | 0 |
| 1795099426 | 30 °C | 51 %RH | 940 hPa | 0 Pkts | 0 |
| 1795097768 | 30 °C | 51 %RH | 940 hPa | 0 Pkts | 0 |
| 1795096112 | 30 °C | 50 %RH | 940 hPa | 0 Pkts | 0 |
| 1795094454 | 30 °C | 51 %RH | 940 hPa | 0 Pkts | 0 |
| 1795092797 | 31 °C | 49 %RH | 940 hPa | 0 Pkts | 0 |
| 1795091140 | 32 °C | 47 %RH | 939 hPa | 0 Pkts | 0 |
| 1795089483 | 32 °C | 48 %RH | 938 hPa | 0 Pkts | 0 |
| 1795087826 | 32 °C | 49 %RH | 938 hPa | 0 Pkts | 0 |
| 1795086169 | 32 °C | 48 %RH | 937 hPa | 0 Pkts | 0 |
| 1795084512 | 32 °C | 48 %RH | 937 hPa | 0 Pkts | 0 |
| 1795082855 | 33 °C | 47 %RH | 936 hPa | 0 Pkts | 0 |
| 1795081198 | 33 °C | 46 %RH | 936 hPa | 0 Pkts | 0 |
| 1795079541 | 34 °C | 43 %RH | 936 hPa | 0 Pkts | 0 |
| 1795077884 | 34 °C | 41 %RH | 936 hPa | 0 Pkts | 0 |
| 1795076227 | 34 °C | 42 %RH | 935 hPa | 0 Pkts | 0 |
| 1795074570 | 35 °C | 40 %RH | 935 hPa | 0 Pkts | 0 |
| 1795072913 | 35 °C | 39 %RH | 936 hPa | 0 Pkts | 0 |
| 1795071256 | 36 °C | 38 %RH | 936 hPa | 0 Pkts | 0 |
| 1795069599 | 37 °C | 35 %RH | 936 hPa | 0 Pkts | 0 |
| 1795067942 | 37 °C | 36 %RH | 936 hPa | 0 Pkts | 0 |
| 1795066285 | 37 °C | 37 %RH | 937 hPa | 0 Pkts | 0 |
| 1795064628 | 35 °C | 44 %RH | 937 hPa | 0 Pkts | 0 |
| 1795062971 | 34 °C | 41 %RH | 938 hPa | 0 Pkts | 0 |
| 1795061314 | 39 °C | 32 %RH | 938 hPa | 0 Pkts | 0 |
*Used Equation Coefficients:
Temp.: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
AllCount: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)