This is the latest recevied telemetry packets stored in our database for station/object KD8NJV-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795109660 | 444 | 594 | 0 | 0 | 0 |
| 1795107867 | 444 | 590 | 0 | 0 | 0 |
| 1795106074 | 444 | 586 | 0 | 0 | 0 |
| 1795104281 | 444 | 583 | 0 | 0 | 0 |
| 1795102489 | 445 | 581 | 0 | 0 | 0 |
| 1795100696 | 444 | 579 | 0 | 0 | 0 |
| 1795098905 | 445 | 578 | 0 | 0 | 0 |
| 1795097113 | 445 | 577 | 0 | 0 | 0 |
| 1795095321 | 444 | 577 | 0 | 0 | 0 |
| 1795093528 | 444 | 577 | 0 | 0 | 0 |
| 1795091736 | 444 | 577 | 0 | 0 | 0 |
| 1795089945 | 444 | 578 | 0 | 0 | 0 |
| 1795088153 | 444 | 578 | 0 | 0 | 0 |
| 1795086360 | 444 | 579 | 0 | 0 | 0 |
| 1795084568 | 444 | 579 | 0 | 0 | 0 |
| 1795082776 | 443 | 580 | 0 | 0 | 0 |
| 1795080984 | 444 | 580 | 0 | 0 | 0 |
| 1795079192 | 444 | 581 | 0 | 0 | 0 |
| 1795077399 | 444 | 582 | 0 | 0 | 0 |
| 1795075605 | 445 | 583 | 0 | 0 | 0 |
| 1795073812 | 444 | 583 | 0 | 0 | 0 |
| 1795072020 | 445 | 584 | 0 | 0 | 0 |
| 1795070227 | 443 | 585 | 0 | 0 | 0 |
| 1795068434 | 444 | 585 | 0 | 0 | 0 |
| 1795066641 | 444 | 586 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)