This is the latest recevied telemetry packets stored in our database for station/object F4IZM-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795116936 | 675 | 526 | 525 | 0 | 0 |
| 1795115132 | 672 | 524 | 523 | 0 | 0 |
| 1795113327 | 669 | 522 | 521 | 0 | 0 |
| 1795111521 | 666 | 520 | 519 | 0 | 0 |
| 1795109716 | 663 | 518 | 517 | 0 | 0 |
| 1795107911 | 661 | 517 | 516 | 0 | 0 |
| 1795106106 | 658 | 515 | 514 | 0 | 0 |
| 1795104301 | 655 | 513 | 512 | 0 | 0 |
| 1795102497 | 633 | 492 | 491 | 0 | 0 |
| 1795100691 | 617 | 477 | 476 | 0 | 0 |
| 1795098886 | 614 | 475 | 474 | 0 | 0 |
| 1795097081 | 611 | 473 | 472 | 0 | 0 |
| 1795095277 | 608 | 471 | 470 | 0 | 0 |
| 1795093471 | 605 | 469 | 468 | 0 | 0 |
| 1795091666 | 587 | 452 | 451 | 0 | 0 |
| 1795089861 | 585 | 451 | 450 | 0 | 0 |
| 1795088056 | 582 | 449 | 448 | 0 | 0 |
| 1795086251 | 579 | 447 | 446 | 0 | 0 |
| 1795084447 | 576 | 445 | 444 | 0 | 0 |
| 1795082641 | 573 | 443 | 442 | 0 | 0 |
| 1795080837 | 570 | 441 | 440 | 0 | 0 |
| 1795079031 | 567 | 439 | 438 | 0 | 0 |
| 1795077226 | 564 | 437 | 436 | 0 | 0 |
| 1795075421 | 554 | 428 | 427 | 0 | 0 |
| 1795073617 | 521 | 396 | 395 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)