This is the latest recevied telemetry packets stored in our database for station/object SR3DPX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795114877 | 236 | 279 | 122 | 0 | 0 |
| 1795113976 | 218 | 255 | 113 | 0 | 0 |
| 1795112174 | 153 | 176 | 78 | 0 | 0 |
| 1795111273 | 126 | 146 | 64 | 0 | 0 |
| 1795110372 | 102 | 119 | 52 | 0 | 0 |
| 1795109475 | 65 | 79 | 33 | 0 | 0 |
| 1795108593 | 982 | 1046 | 491 | 0 | 0 |
| 1795107692 | 935 | 988 | 468 | 0 | 0 |
| 1795105890 | 805 | 880 | 404 | 0 | 0 |
| 1795104989 | 764 | 840 | 383 | 0 | 0 |
| 1795104087 | 678 | 772 | 342 | 0 | 0 |
| 1795103186 | 594 | 713 | 304 | 0 | 0 |
| 1795102286 | 532 | 658 | 273 | 0 | 0 |
| 1795101385 | 472 | 606 | 243 | 0 | 0 |
| 1795100484 | 419 | 552 | 216 | 0 | 0 |
| 1795099583 | 405 | 530 | 208 | 0 | 0 |
| 1795098682 | 388 | 501 | 198 | 0 | 0 |
| 1795097781 | 377 | 482 | 192 | 0 | 0 |
| 1795096880 | 357 | 457 | 182 | 0 | 0 |
| 1795095979 | 327 | 422 | 167 | 0 | 0 |
| 1795095078 | 301 | 389 | 153 | 0 | 0 |
| 1795094177 | 280 | 360 | 142 | 0 | 0 |
| 1795093276 | 246 | 319 | 124 | 0 | 0 |
| 1795092375 | 202 | 267 | 103 | 0 | 0 |
| 1795091474 | 142 | 205 | 73 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)