This is the latest recevied telemetry packets stored in our database for station/object KF5IRT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795099913 | 420 | 606 | 0 | 0 | 0 |
| 1795098125 | 424 | 608 | 0 | 0 | 0 |
| 1795096317 | 502 | 602 | 0 | 0 | 0 |
| 1795096261 | 503 | 602 | 0 | 0 | 0 |
| 1795096207 | 504 | 601 | 0 | 0 | 0 |
| 1795096039 | 503 | 599 | 0 | 0 | 0 |
| 1795095940 | 503 | 598 | 0 | 0 | 0 |
| 1795095905 | 507 | 597 | 0 | 0 | 0 |
| 1795095876 | 502 | 597 | 0 | 0 | 0 |
| 1795095831 | 501 | 595 | 0 | 0 | 0 |
| 1795095827 | 505 | 595 | 0 | 0 | 0 |
| 1795095820 | 504 | 595 | 0 | 0 | 0 |
| 1795095771 | 504 | 594 | 0 | 0 | 0 |
| 1795095670 | 507 | 592 | 0 | 0 | 0 |
| 1795095475 | 500 | 589 | 0 | 0 | 0 |
| 1795095359 | 496 | 589 | 0 | 0 | 0 |
| 1795095314 | 496 | 589 | 0 | 0 | 0 |
| 1795095294 | 498 | 588 | 0 | 0 | 0 |
| 1795095264 | 497 | 587 | 0 | 0 | 0 |
| 1795095246 | 490 | 586 | 0 | 0 | 0 |
| 1795094619 | 491 | 585 | 0 | 0 | 0 |
| 1795092821 | 419 | 584 | 0 | 0 | 0 |
| 1795091023 | 420 | 585 | 0 | 0 | 0 |
| 1795087425 | 420 | 584 | 0 | 0 | 0 |
| 1795080231 | 421 | 586 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)