This is the latest recevied telemetry packets stored in our database for station/object W6SRR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | DC* | PC Board* | CPU* | Ambient* | Value5* |
|---|---|---|---|---|---|
| 1795105912 | 1351 | 66.4 | 27.3 | 59.9 | 0 |
| 1795105011 | 1351 | 66.3 | 27.3 | 59.8 | 0 |
| 1795104111 | 1351 | 66.2 | 27.9 | 59.7 | 0 |
| 1795103209 | 1351 | 66.2 | 27.3 | 59.6 | 0 |
| 1795102311 | 1349 | 66.2 | 26.8 | 59.6 | 0 |
| 1795101410 | 1351 | 66.3 | 27.9 | 59.7 | 0 |
| 1795100512 | 1351 | 66.4 | 27.9 | 59.8 | 0 |
| 1795099610 | 1353 | 66.3 | 27.3 | 59.8 | 0 |
| 1795098712 | 1351 | 66.4 | 27.9 | 59.8 | 0 |
| 1795097811 | 1351 | 66.4 | 27.3 | 59.9 | 0 |
| 1795096911 | 1351 | 66.5 | 27.3 | 59.9 | 0 |
| 1795096010 | 1353 | 66.4 | 27.9 | 59.9 | 0 |
| 1795095116 | 1351 | 66.5 | 27.9 | 60 | 0 |
| 1795094210 | 1351 | 66.4 | 27.9 | 60 | 0 |
| 1795093313 | 1351 | 66.6 | 27.9 | 60 | 0 |
| 1795092409 | 1351 | 66.5 | 27.9 | 60 | 0 |
| 1795091513 | 1351 | 66.5 | 27.9 | 60 | 0 |
| 1795090611 | 1349 | 66.6 | 27.9 | 60 | 0 |
| 1795089712 | 1351 | 66.8 | 27.3 | 60.1 | 0 |
| 1795088810 | 1351 | 66.8 | 27.9 | 60.2 | 0 |
| 1795087913 | 1351 | 66.9 | 27.9 | 60.4 | 0 |
| 1795087011 | 1351 | 66.9 | 27.9 | 60.4 | 0 |
| 1795086111 | 1353 | 67 | 27.9 | 60.4 | 0 |
| 1795085209 | 1353 | 66.9 | 27.9 | 60.4 | 0 |
| 1795084313 | 1351 | 66.9 | 26.8 | 60.4 | 0 |
*Used Equation Coefficients:
DC: 0, 1, 1000
PC Board: 0, 0.1, 0
CPU: 0, 0.1, 0
Ambient: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)