This is the latest recevied telemetry packets stored in our database for station/object CE3WIT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795109814 | 448 | 0 | 0 | 0 | 0 |
| 1795108914 | 440 | 0 | 0 | 0 | 0 |
| 1795108014 | 423 | 0 | 0 | 0 | 0 |
| 1795107114 | 417 | 0 | 0 | 0 | 0 |
| 1795106214 | 449 | 0 | 0 | 0 | 0 |
| 1795105314 | 423 | 0 | 0 | 0 | 0 |
| 1795104413 | 450 | 0 | 0 | 0 | 0 |
| 1795103513 | 448 | 0 | 0 | 0 | 0 |
| 1795102613 | 425 | 0 | 0 | 0 | 0 |
| 1795101712 | 448 | 0 | 0 | 0 | 0 |
| 1795100812 | 431 | 0 | 0 | 0 | 0 |
| 1795099912 | 445 | 0 | 0 | 0 | 0 |
| 1795099012 | 419 | 0 | 0 | 0 | 0 |
| 1795098112 | 428 | 0 | 0 | 0 | 0 |
| 1795097211 | 432 | 0 | 0 | 0 | 0 |
| 1795096311 | 442 | 0 | 0 | 0 | 0 |
| 1795095411 | 422 | 0 | 0 | 0 | 0 |
| 1795094511 | 445 | 0 | 0 | 0 | 0 |
| 1795093611 | 433 | 0 | 0 | 0 | 0 |
| 1795092711 | 419 | 0 | 0 | 0 | 0 |
| 1795091811 | 447 | 0 | 0 | 0 | 0 |
| 1795090911 | 431 | 0 | 0 | 0 | 0 |
| 1795090011 | 438 | 0 | 0 | 0 | 0 |
| 1795089111 | 441 | 0 | 0 | 0 | 0 |
| 1795088211 | 421 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)