This is the latest recevied telemetry packets stored in our database for station/object SP2RO-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795099902 | 103 Count | 578 Count | 91 Count | 1.86 VDC | 0 VDC |
| 1795099001 | 102 Count | 557 Count | 91 Count | 1.84 VDC | 0 VDC |
| 1795098100 | 101 Count | 515 Count | 91 Count | 1.95 VDC | 0 VDC |
| 1795097200 | 84 Count | 453 Count | 75 Count | 2.01 VDC | 0 VDC |
| 1795096299 | 66 Count | 374 Count | 58 Count | 1.84 VDC | 0 VDC |
| 1795095398 | 57 Count | 310 Count | 50 Count | 1.99 VDC | 0 VDC |
| 1795094497 | 44 Count | 252 Count | 38 Count | 1.99 VDC | 0 VDC |
| 1795093597 | 10 Count | 180 Count | 5 Count | 1.9 VDC | 0 VDC |
| 1795092696 | 4 Count | 146 Count | 0 Count | 1.95 VDC | 0 VDC |
| 1795091794 | 3 Count | 132 Count | 0 Count | 1.97 VDC | 0 VDC |
| 1795090893 | 2 Count | 103 Count | 0 Count | 1.95 VDC | 0 VDC |
| 1795089993 | 1 Count | 77 Count | 0 Count | 1.92 VDC | 0 VDC |
| 1795089092 | 0 Count | 24 Count | 0 Count | 1.95 VDC | 0 VDC |
| 1795088191 | 72 Count | 1040 Count | 21 Count | 1.98 VDC | 0 VDC |
| 1795087290 | 71 Count | 995 Count | 21 Count | 1.93 VDC | 0 VDC |
| 1795086389 | 70 Count | 977 Count | 21 Count | 1.95 VDC | 0 VDC |
| 1795085489 | 69 Count | 950 Count | 21 Count | 1.89 VDC | 0 VDC |
| 1795084588 | 68 Count | 928 Count | 21 Count | 2.03 VDC | 0 VDC |
| 1795083687 | 67 Count | 897 Count | 21 Count | 1.95 VDC | 0 VDC |
| 1795082786 | 66 Count | 891 Count | 21 Count | 1.9 VDC | 0 VDC |
| 1795081885 | 65 Count | 876 Count | 21 Count | 2.03 VDC | 0 VDC |
| 1795080985 | 64 Count | 869 Count | 21 Count | 2.07 VDC | 0 VDC |
| 1795080084 | 63 Count | 859 Count | 21 Count | 1.99 VDC | 0 VDC |
| 1795079183 | 61 Count | 851 Count | 21 Count | 1.91 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)