This is the latest recevied telemetry packets stored in our database for station/object SR2ATJ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795108909 | 83 Count | 617 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795107108 | 79 Count | 587 Count | 0 Count | 4 VDC | 0 VDC |
| 1795105308 | 73 Count | 560 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1795103507 | 69 Count | 533 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795101706 | 63 Count | 504 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795099905 | 59 Count | 476 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795098104 | 53 Count | 403 Count | 0 Count | 4 VDC | 0 VDC |
| 1795096303 | 49 Count | 370 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795094503 | 44 Count | 335 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795092702 | 41 Count | 300 Count | 0 Count | 4 VDC | 0 VDC |
| 1795090901 | 37 Count | 266 Count | 0 Count | 4 VDC | 0 VDC |
| 1795087315 | 25 Count | 214 Count | 0 Count | 4 VDC | 0 VDC |
| 1795085515 | 21 Count | 180 Count | 0 Count | 4 VDC | 0 VDC |
| 1795083714 | 17 Count | 143 Count | 0 Count | 4 VDC | 0 VDC |
| 1795081913 | 13 Count | 109 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795080112 | 7 Count | 72 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795078311 | 3 Count | 39 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795076511 | 143 Count | 1069 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795074710 | 139 Count | 997 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795072909 | 135 Count | 968 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795071108 | 131 Count | 934 Count | 0 Count | 4.06 VDC | 0 VDC |
| 1795069308 | 127 Count | 900 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795067507 | 123 Count | 868 Count | 0 Count | 3.98 VDC | 0 VDC |
| 1795065706 | 119 Count | 841 Count | 0 Count | 3.99 VDC | 0 VDC |
| 1795063905 | 115 Count | 812 Count | 0 Count | 3.98 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)