This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795103567 | 324 | 544 | 279 | 452 | 0 |
| 1795102328 | 322 | 538 | 279 | 447 | 0 |
| 1795101129 | 324 | 538 | 279 | 445 | 0 |
| 1795099933 | 324 | 537 | 279 | 444 | 0 |
| 1795098726 | 324 | 537 | 279 | 442 | 0 |
| 1795097535 | 325 | 538 | 279 | 440 | 0 |
| 1795096331 | 324 | 540 | 279 | 443 | 0 |
| 1795095167 | 324 | 547 | 284 | 445 | 0 |
| 1795093929 | 313 | 553 | 289 | 455 | 0 |
| 1795092730 | 323 | 553 | 284 | 457 | 0 |
| 1795091526 | 327 | 556 | 284 | 460 | 0 |
| 1795090333 | 327 | 562 | 289 | 467 | 0 |
| 1795089136 | 326 | 564 | 289 | 470 | 0 |
| 1795087933 | 328 | 564 | 295 | 470 | 0 |
| 1795086739 | 331 | 563 | 289 | 470 | 0 |
| 1795085528 | 329 | 564 | 289 | 470 | 0 |
| 1795084336 | 328 | 561 | 289 | 470 | 0 |
| 1795083144 | 330 | 562 | 279 | 471 | 0 |
| 1795081963 | 330 | 563 | 284 | 471 | 0 |
| 1795080727 | 338 | 564 | 279 | 470 | 0 |
| 1795079530 | 338 | 564 | 289 | 470 | 0 |
| 1795078337 | 331 | 563 | 295 | 470 | 0 |
| 1795077136 | 332 | 564 | 289 | 470 | 0 |
| 1795075930 | 332 | 565 | 289 | 471 | 0 |
| 1795074747 | 331 | 565 | 289 | 472 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)