This is the latest recevied telemetry packets stored in our database for station/object DM2COL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795102221 | 417 | 384 | 0 | 0 | 0 |
| 1795100421 | 417 | 803 | 0 | 0 | 0 |
| 1795098620 | 417 | 338 | 0 | 0 | 0 |
| 1795096820 | 417 | 803 | 0 | 0 | 0 |
| 1795095019 | 417 | 803 | 0 | 0 | 0 |
| 1795093218 | 417 | 803 | 0 | 0 | 0 |
| 1795091417 | 417 | 392 | 0 | 0 | 0 |
| 1795089616 | 417 | 803 | 0 | 0 | 0 |
| 1795087815 | 417 | 384 | 0 | 0 | 0 |
| 1795086014 | 417 | 322 | 0 | 0 | 0 |
| 1795084213 | 417 | 376 | 0 | 0 | 0 |
| 1795082413 | 417 | 803 | 0 | 0 | 0 |
| 1795080612 | 417 | 803 | 0 | 0 | 0 |
| 1795078811 | 417 | 338 | 0 | 0 | 0 |
| 1795077011 | 417 | 803 | 0 | 0 | 0 |
| 1795075210 | 417 | 400 | 0 | 0 | 0 |
| 1795073410 | 417 | 400 | 0 | 0 | 0 |
| 1795071609 | 417 | 314 | 0 | 0 | 0 |
| 1795069808 | 417 | 361 | 0 | 0 | 0 |
| 1795068008 | 417 | 353 | 0 | 0 | 0 |
| 1795066208 | 417 | 803 | 0 | 0 | 0 |
| 1795064407 | 417 | 322 | 0 | 0 | 0 |
| 1795062607 | 417 | 532 | 0 | 0 | 0 |
| 1795059005 | 417 | 803 | 0 | 0 | 0 |
| 1795057204 | 417 | 803 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)