This is the latest recevied telemetry packets stored in our database for station/object K6IXQ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795113872 | 461 | 616 | 0 | 0 | 0 |
| 1795113568 | 461 | 614 | 0 | 0 | 0 |
| 1795113412 | 463 | 614 | 0 | 0 | 0 |
| 1795112622 | 463 | 611 | 0 | 0 | 0 |
| 1795112481 | 463 | 611 | 0 | 0 | 0 |
| 1795112449 | 462 | 611 | 0 | 0 | 0 |
| 1795112336 | 463 | 610 | 0 | 0 | 0 |
| 1795112328 | 459 | 610 | 0 | 0 | 0 |
| 1795112309 | 461 | 610 | 0 | 0 | 0 |
| 1795111162 | 463 | 611 | 0 | 0 | 0 |
| 1795111053 | 464 | 611 | 0 | 0 | 0 |
| 1795110681 | 465 | 610 | 0 | 0 | 0 |
| 1795110565 | 468 | 609 | 0 | 0 | 0 |
| 1795110536 | 468 | 609 | 0 | 0 | 0 |
| 1795110531 | 468 | 609 | 0 | 0 | 0 |
| 1795107983 | 470 | 609 | 0 | 0 | 0 |
| 1795107852 | 470 | 608 | 0 | 0 | 0 |
| 1795107703 | 471 | 607 | 0 | 0 | 0 |
| 1795107629 | 470 | 606 | 0 | 0 | 0 |
| 1795107567 | 472 | 606 | 0 | 0 | 0 |
| 1795107560 | 471 | 606 | 0 | 0 | 0 |
| 1795098362 | 395 | 605 | 0 | 0 | 0 |
| 1795092985 | 395 | 605 | 0 | 0 | 0 |
| 1795091193 | 395 | 605 | 0 | 0 | 0 |
| 1795089401 | 395 | 605 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)