This is the latest recevied telemetry packets stored in our database for station/object IU2RPR-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxPkt* | TxPkt* | Batt* | Volt Aux* | Ampere Aux* |
|---|---|---|---|---|---|
| 1795124595 | 2 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.4 Volt | -0.06 Ampere |
| 1795122794 | 3 Pkt/10m | 0 Pkt/10m | 1.98 Volt | 12.5 Volt | -0.09 Ampere |
| 1795120993 | 1 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.6 Volt | -0.06 Ampere |
| 1795119192 | 2 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.6 Volt | -0.06 Ampere |
| 1795117391 | 2 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.6 Volt | -0.06 Ampere |
| 1795115589 | 3 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.6 Volt | -0.06 Ampere |
| 1795113788 | 3 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.06 Ampere |
| 1795111987 | 1 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.06 Ampere |
| 1795110186 | 3 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.09 Ampere |
| 1795108384 | 2 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.06 Ampere |
| 1795106583 | 3 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.06 Ampere |
| 1795104782 | 2 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.09 Ampere |
| 1795102981 | 3 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.08 Ampere |
| 1795101179 | 2 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.8 Volt | -0.04 Ampere |
| 1795099378 | 1 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.8 Volt | -0.05 Ampere |
| 1795097579 | 1 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.8 Volt | -0.01 Ampere |
| 1795095776 | 0 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.9 Volt | 0.04 Ampere |
| 1795093976 | 2 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.9 Volt | 0.2 Ampere |
| 1795092174 | 0 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 13 Volt | 0.49 Ampere |
| 1795090373 | 1 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | 0.03 Ampere |
| 1795088571 | 0 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.03 Ampere |
| 1795086770 | 1 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.03 Ampere |
| 1795084969 | 0 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.07 Ampere |
| 1795083168 | 1 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.09 Ampere |
| 1795081367 | 0 Pkt/10m | 0 Pkt/10m | 1.96 Volt | 12.7 Volt | -0.06 Ampere |
*Used Equation Coefficients:
RxPkt: 0, 1, 0
TxPkt: 0, 1, 0
Batt: 0, 0.0196, 0
Volt Aux: 0, 0.1, 0
Ampere Aux: 0, 0.01, -1.27
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)