This is the latest recevied telemetry packets stored in our database for station/object DC4HF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795113424 | 1398 | 5673 | 7421 | 3478 | 4401 |
| 1795112522 | 1398 | 5675 | 7420 | 3488 | 4397 |
| 1795111622 | 1398 | 5674 | 7419 | 3504 | 4375 |
| 1795110720 | 1398 | 5679 | 7417 | 3521 | 4349 |
| 1795109820 | 1398 | 5681 | 7423 | 3545 | 4323 |
| 1795108919 | 1398 | 5685 | 7424 | 3569 | 4310 |
| 1795108017 | 1398 | 5684 | 7421 | 3591 | 4294 |
| 1795107116 | 1398 | 5684 | 7419 | 3612 | 4254 |
| 1795106215 | 1398 | 5687 | 7422 | 3641 | 4182 |
| 1795105314 | 1398 | 5692 | 7426 | 3702 | 4010 |
| 1795104413 | 1398 | 5693 | 7422 | 3691 | 4105 |
| 1795103513 | 1398 | 5696 | 7426 | 3730 | 4008 |
| 1795102612 | 1398 | 5662 | 7423 | 3802 | 3720 |
| 1795101711 | 1398 | 5690 | 7429 | 3804 | 3830 |
| 1795100809 | 1398 | 5735 | 7428 | 3844 | 3892 |
| 1795099908 | 1398 | 5743 | 7431 | 3906 | 3763 |
| 1795099007 | 1398 | 5856 | 7429 | 4104 | 3242 |
| 1795098079 | 1398 | 6713 | 7423 | 3780 | 3886 |
| 1795097154 | 1397 | 6735 | 7422 | 3589 | 4259 |
| 1795096223 | 1397 | 5638 | 7422 | 3491 | 4483 |
| 1795095323 | 1397 | 5638 | 7418 | 3486 | 4507 |
| 1795094423 | 1397 | 5641 | 7421 | 3476 | 4540 |
| 1795093520 | 1397 | 5639 | 7415 | 3464 | 4571 |
| 1795092620 | 1397 | 5640 | 7415 | 3451 | 4534 |
| 1795091719 | 1397 | 5642 | 7417 | 3443 | 4526 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)