This is the latest recevied telemetry packets stored in our database for station/object SP4HMU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795106592 | 133 | 761 | 83 | 0 | 0 |
| 1795105992 | 131 | 751 | 82 | 0 | 0 |
| 1795105391 | 127 | 735 | 79 | 0 | 0 |
| 1795104791 | 123 | 721 | 76 | 0 | 0 |
| 1795104190 | 121 | 711 | 75 | 0 | 0 |
| 1795103589 | 117 | 693 | 72 | 0 | 0 |
| 1795102989 | 113 | 677 | 69 | 0 | 0 |
| 1795102387 | 111 | 654 | 68 | 0 | 0 |
| 1795101787 | 107 | 636 | 65 | 0 | 0 |
| 1795101186 | 103 | 622 | 62 | 0 | 0 |
| 1795100585 | 101 | 612 | 61 | 0 | 0 |
| 1795099985 | 97 | 594 | 58 | 0 | 0 |
| 1795099384 | 92 | 559 | 54 | 0 | 0 |
| 1795098783 | 89 | 545 | 52 | 0 | 0 |
| 1795098183 | 85 | 530 | 49 | 0 | 0 |
| 1795097582 | 81 | 517 | 46 | 0 | 0 |
| 1795096981 | 79 | 505 | 45 | 0 | 0 |
| 1795096381 | 62 | 468 | 29 | 0 | 0 |
| 1795095780 | 57 | 438 | 25 | 0 | 0 |
| 1795095180 | 55 | 427 | 24 | 0 | 0 |
| 1795094579 | 52 | 413 | 22 | 0 | 0 |
| 1795093978 | 49 | 397 | 20 | 0 | 0 |
| 1795093378 | 47 | 376 | 19 | 0 | 0 |
| 1795092777 | 44 | 363 | 17 | 0 | 0 |
| 1795092176 | 42 | 349 | 16 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)