This is the latest recevied telemetry packets stored in our database for station/object HS8AS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TEMP* | HUM* | VBAT * | CPU* | Value5* |
|---|---|---|---|---|---|
| 1795120571 | 25.44 °C | 97.6 %RH | 4 V | 30.29 °C | 0 |
| 1795119971 | 25.43 °C | 97.4 %RH | 4 V | 30.29 °C | 0 |
| 1795119371 | 25.57 °C | 96.4 %RH | 4 V | 31.29 °C | 0 |
| 1795118771 | 25.57 °C | 96.2 %RH | 4 V | 31.29 °C | 0 |
| 1795118171 | 25.4 °C | 98 %RH | 3.99 V | 31.29 °C | 0 |
| 1795117571 | 25.44 °C | 98.1 %RH | 4 V | 31.29 °C | 0 |
| 1795116971 | 25.5 °C | 96.4 %RH | 4 V | 31.29 °C | 0 |
| 1795116371 | 25.36 °C | 96.1 %RH | 4 V | 30.29 °C | 0 |
| 1795115771 | 25.39 °C | 95.5 %RH | 4 V | 31.29 °C | 0 |
| 1795115171 | 25.26 °C | 95.9 %RH | 4 V | 30.29 °C | 0 |
| 1795114571 | 25.33 °C | 94.7 %RH | 4 V | 30.29 °C | 0 |
| 1795113971 | 25.29 °C | 93 %RH | 4 V | 31.29 °C | 0 |
| 1795113371 | 25.21 °C | 91.3 %RH | 4 V | 31.29 °C | 0 |
| 1795112771 | 25.19 °C | 89.1 %RH | 3.99 V | 31.29 °C | 0 |
| 1795112171 | 25.16 °C | 88.1 %RH | 4 V | 31.29 °C | 0 |
| 1795111571 | 25.14 °C | 88.3 %RH | 4 V | 31.29 °C | 0 |
| 1795110971 | 24.95 °C | 88.2 %RH | 4 V | 30.29 °C | 0 |
| 1795110371 | 24.94 °C | 87.9 %RH | 4 V | 30.29 °C | 0 |
| 1795109771 | 24.77 °C | 89.3 %RH | 4 V | 30.29 °C | 0 |
| 1795109171 | 24.79 °C | 88.6 %RH | 4 V | 30.29 °C | 0 |
| 1795108571 | 24.77 °C | 89.3 %RH | 4 V | 30.29 °C | 0 |
| 1795107971 | 24.79 °C | 89.1 %RH | 4 V | 30.29 °C | 0 |
*Used Equation Coefficients:
TEMP: 0, 0.01, 0
HUM: 0, 0.1, 0
VBAT : 0, 0.01, 0
CPU: 0, 0.01, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)