This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795117170 | 358 | 632 | 343 | 496 | 0 |
| 1795116604 | 360 | 632 | 343 | 496 | 0 |
| 1795115970 | 361 | 632 | 343 | 496 | 0 |
| 1795115407 | 356 | 632 | 343 | 494 | 0 |
| 1795114770 | 356 | 630 | 349 | 494 | 0 |
| 1795114206 | 358 | 635 | 343 | 496 | 0 |
| 1795113570 | 358 | 638 | 349 | 503 | 0 |
| 1795113004 | 360 | 642 | 349 | 507 | 0 |
| 1795112369 | 360 | 644 | 354 | 515 | 0 |
| 1795111807 | 360 | 644 | 354 | 518 | 0 |
| 1795111170 | 358 | 643 | 354 | 516 | 0 |
| 1795110606 | 355 | 640 | 349 | 514 | 0 |
| 1795109970 | 358 | 632 | 343 | 514 | 0 |
| 1795109405 | 358 | 624 | 343 | 504 | 0 |
| 1795108769 | 360 | 620 | 338 | 485 | 0 |
| 1795108205 | 360 | 618 | 343 | 483 | 0 |
| 1795107569 | 358 | 617 | 338 | 483 | 0 |
| 1795107006 | 356 | 617 | 338 | 482 | 0 |
| 1795106370 | 355 | 618 | 332 | 484 | 0 |
| 1795105805 | 360 | 617 | 338 | 481 | 0 |
| 1795105170 | 358 | 617 | 338 | 480 | 0 |
| 1795104606 | 361 | 618 | 338 | 482 | 0 |
| 1795103969 | 363 | 617 | 343 | 486 | 0 |
| 1795103406 | 361 | 618 | 332 | 484 | 0 |
| 1795102770 | 355 | 618 | 343 | 484 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)