This is the latest recevied telemetry packets stored in our database for station/object W4KEL-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795118482 | 13.57 | 25.63 | 0 | 0 | 0 |
| 1795114398 | 13.48 | 25.63 | 0 | 0 | 0 |
| 1795112367 | 13.51 | 25.63 | 0 | 0 | 0 |
| 1795110314 | 13.65 | 25.14 | 0 | 0 | 0 |
| 1795108273 | 14.01 | 23.67 | 0 | 0 | 0 |
| 1795104197 | 15.29 | 22.21 | 0 | 0 | 0 |
| 1795102149 | 15.35 | 21.23 | 0 | 0 | 0 |
| 1795100115 | 15.12 | 16.34 | 0 | 0 | 0 |
| 1795098069 | 14.33 | 11.94 | 0 | 0 | 0 |
| 1795096029 | 13.77 | 10.96 | 0 | 0 | 0 |
| 1795093989 | 13.48 | 10.96 | 0 | 0 | 0 |
| 1795091954 | 13.45 | 10.96 | 0 | 0 | 0 |
| 1795089906 | 13.45 | 10.96 | 0 | 0 | 0 |
| 1795087872 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1795085826 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1795083786 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1795081750 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1795079705 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1795077670 | 13.42 | 10.96 | 0 | 0 | 0 |
| 1795075625 | 13.45 | 10.96 | 0 | 0 | 0 |
| 1795073592 | 13.48 | 10.96 | 0 | 0 | 0 |
| 1795071546 | 13.45 | 10.96 | 0 | 0 | 0 |
| 1795067466 | 13.45 | 11.94 | 0 | 0 | 0 |
| 1795065426 | 13.42 | 12.43 | 0 | 0 | 0 |
| 1795063386 | 13.45 | 13.4 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.489, -273.15
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)