This is the latest recevied telemetry packets stored in our database for station/object SV2BXU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795114710 | 779 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114647 | 778 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114583 | 777 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114520 | 776 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114456 | 775 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114392 | 774 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114329 | 773 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114265 | 772 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114201 | 771 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114138 | 770 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114074 | 769 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795114010 | 768 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113947 | 767 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113883 | 766 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113820 | 765 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113756 | 764 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113693 | 763 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113629 | 762 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113565 | 761 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113502 | 760 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113438 | 759 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113375 | 758 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113311 | 757 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113247 | 756 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
| 1795113184 | 755 Count | 0 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)