This is the latest recevied telemetry packets stored in our database for station/object EA4AOJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humidity* | Pressure* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795126525 | 19 | 37 | 947 | 0 | 0 |
| 1795125925 | 19 | 37 | 947 | 0 | 0 |
| 1795125325 | 19 | 37 | 947 | 0 | 0 |
| 1795124724 | 19 | 37 | 947 | 0 | 0 |
| 1795124123 | 19 | 37 | 947 | 0 | 0 |
| 1795123524 | 19 | 37 | 947 | 0 | 0 |
| 1795122922 | 20 | 37 | 947 | 0 | 0 |
| 1795122322 | 20 | 37 | 947 | 0 | 0 |
| 1795121722 | 20 | 37 | 947 | 0 | 0 |
| 1795121121 | 20 | 37 | 947 | 0 | 0 |
| 1795120521 | 19 | 37 | 946 | 0 | 0 |
| 1795119921 | 19 | 38 | 946 | 0 | 0 |
| 1795119320 | 19 | 38 | 946 | 0 | 0 |
| 1795118720 | 19 | 38 | 946 | 0 | 0 |
| 1795118120 | 19 | 39 | 946 | 0 | 0 |
| 1795117519 | 19 | 39 | 946 | 0 | 0 |
| 1795116919 | 19 | 39 | 946 | 0 | 0 |
| 1795116319 | 19 | 39 | 946 | 0 | 0 |
| 1795115718 | 19 | 39 | 946 | 0 | 0 |
| 1795115117 | 19 | 39 | 946 | 0 | 0 |
| 1795114517 | 19 | 39 | 945 | 0 | 0 |
| 1795113964 | 19 | 39 | 945 | 0 | 0 |
| 1795113316 | 19 | 38 | 945 | 0 | 0 |
| 1795112716 | 19 | 38 | 945 | 0 | 0 |
| 1795112115 | 19 | 38 | 945 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Humidity: 0, 1, 0
Pressure: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)