This is the latest recevied telemetry packets stored in our database for station/object HS5AU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | VBAT* | IBAT* | SOLAR* | SUN* | TEMP* |
|---|---|---|---|---|---|
| 1795123377 | 13.13 V | 52 mA | 7.41 V | 2 W/m² | 23.37 °C |
| 1795122777 | 13.13 V | 42 mA | 7.41 V | 2 W/m² | 23.31 °C |
| 1795122177 | 13.12 V | 59 mA | 7.41 V | 2 W/m² | 23.31 °C |
| 1795121577 | 13.12 V | 59 mA | 7.41 V | 2 W/m² | 23.23 °C |
| 1795120977 | 13.13 V | 59 mA | 7.41 V | 2 W/m² | 23.09 °C |
| 1795120377 | 13.13 V | 42 mA | 7.41 V | 2 W/m² | 23.36 °C |
| 1795119777 | 13.13 V | 45 mA | 7.41 V | 2 W/m² | 23.57 °C |
| 1795119177 | 13.13 V | 46 mA | 7.41 V | 2 W/m² | 23.63 °C |
| 1795118577 | 13.12 V | 68 mA | 7.4 V | 2 W/m² | 23.5 °C |
| 1795118013 | 13.13 V | 47 mA | 7.41 V | 2 W/m² | 23.59 °C |
| 1795117414 | 13.14 V | 42 mA | 7.41 V | 2 W/m² | 23.46 °C |
| 1795116814 | 13.13 V | 45 mA | 7.41 V | 2 W/m² | 23.26 °C |
| 1795116213 | 13.13 V | 42 mA | 7.41 V | 2 W/m² | 23.16 °C |
| 1795115613 | 13.14 V | 43 mA | 7.41 V | 2 W/m² | 23.12 °C |
| 1795115013 | 13.14 V | 44 mA | 7.41 V | 2 W/m² | 23.06 °C |
| 1795114413 | 13.14 V | 43 mA | 7.41 V | 2 W/m² | 23.07 °C |
| 1795113813 | 13.14 V | 42 mA | 7.41 V | 2 W/m² | 23.13 °C |
| 1795113213 | 13.14 V | 46 mA | 7.41 V | 2 W/m² | 23.3 °C |
| 1795112614 | 13.14 V | 41 mA | 7.41 V | 2 W/m² | 23.19 °C |
| 1795112013 | 13.14 V | 47 mA | 7.41 V | 2 W/m² | 23.13 °C |
| 1795111414 | 13.14 V | 46 mA | 7.42 V | 2 W/m² | 23.08 °C |
| 1795110813 | 13.14 V | 43 mA | 7.42 V | 2 W/m² | 23.05 °C |
*Used Equation Coefficients:
VBAT: 0, 0.01, 0
IBAT: 0, 1, -2000
SOLAR: 0, 0.01, 0
SUN: 0, 1, 0
TEMP: 0, 0.01, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)