This is the latest recevied telemetry packets stored in our database for station/object SP2GPU-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795125386 | 919 | 600 | 577 | 422 | 0 |
| 1795124485 | 917 | 599 | 576 | 423 | 0 |
| 1795123584 | 914 | 597 | 574 | 425 | 0 |
| 1795122683 | 911 | 595 | 572 | 425 | 0 |
| 1795121782 | 906 | 591 | 568 | 423 | 0 |
| 1795120880 | 904 | 590 | 567 | 421 | 0 |
| 1795119979 | 902 | 589 | 566 | 424 | 0 |
| 1795119079 | 900 | 588 | 565 | 422 | 0 |
| 1795118178 | 898 | 587 | 564 | 421 | 0 |
| 1795117277 | 893 | 583 | 560 | 426 | 0 |
| 1795116376 | 882 | 573 | 550 | 423 | 0 |
| 1795115475 | 881 | 573 | 550 | 424 | 0 |
| 1795114574 | 880 | 573 | 550 | 423 | 0 |
| 1795113673 | 878 | 572 | 549 | 422 | 0 |
| 1795112772 | 877 | 572 | 549 | 426 | 0 |
| 1795111872 | 876 | 572 | 549 | 424 | 0 |
| 1795110971 | 875 | 572 | 549 | 423 | 0 |
| 1795110070 | 874 | 572 | 549 | 426 | 0 |
| 1795109169 | 873 | 572 | 549 | 421 | 0 |
| 1795108268 | 872 | 572 | 549 | 423 | 0 |
| 1795107367 | 871 | 572 | 549 | 422 | 0 |
| 1795106466 | 870 | 572 | 549 | 426 | 0 |
| 1795105566 | 868 | 571 | 548 | 422 | 0 |
| 1795104665 | 866 | 570 | 547 | 424 | 0 |
| 1795103764 | 865 | 570 | 547 | 425 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)