This is the latest recevied telemetry packets stored in our database for station/object IW4DZV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPUTemp* | UpTime* | Temp* | ReHum* | Pres* |
|---|---|---|---|---|---|
| 1795122401 | 31.52 deg C | 2408 hours | 22.73 deg C | 38.9 % | 1000 hPa |
| 1795121910 | 31.47 deg C | 2408 hours | 22.71 deg C | 39.1 % | 1000 hPa |
| 1795121341 | 31.42 deg C | 2408 hours | 22.92 deg C | 38.4 % | 1000 hPa |
| 1795120795 | 31.47 deg C | 2408 hours | 22.93 deg C | 38.7 % | 1000 hPa |
| 1795120245 | 31.52 deg C | 2407 hours | 22.91 deg C | 38.8 % | 1000 hPa |
| 1795119740 | 31.52 deg C | 2407 hours | 22.85 deg C | 39 % | 1000 hPa |
| 1795119214 | 31.47 deg C | 2407 hours | 22.87 deg C | 38.9 % | 999 hPa |
*Used Equation Coefficients:
CPUTemp: 0, 0.01, 0
UpTime: 0, 1, 0
Temp: 0, 0.01, 0
ReHum: 0, 0.1, 0
Pres: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)