This is the latest recevied telemetry packets stored in our database for station/object CE4ERM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Celsius* | Rel_Hum* | Atm_Press* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795096529 | 19 C | 35.72 % | 1015.75 hPa | 0 | 0 |
| 1795095925 | 17.3 C | 38.11 % | 1015.38 hPa | 0 | 0 |
| 1795094717 | 17.4 C | 38.25 % | 1017.13 hPa | 0 | 0 |
| 1795094113 | 17.5 C | 38.16 % | 1017.38 hPa | 0 | 0 |
| 1795093509 | 16.4 C | 40.82 % | 1016.25 hPa | 0 | 0 |
| 1795092905 | 16.6 C | 41.47 % | 1017.38 hPa | 0 | 0 |
| 1795092301 | 16 C | 40.11 % | 1018 hPa | 0 | 0 |
| 1795091697 | 15.8 C | 42.33 % | 1016.25 hPa | 0 | 0 |
| 1795091093 | 15.6 C | 41.47 % | 1017.13 hPa | 0 | 0 |
| 1795090489 | 15.7 C | 42.16 % | 1017.88 hPa | 0 | 0 |
| 1795089885 | 15.5 C | 42.43 % | 1016.13 hPa | 0 | 0 |
| 1795088073 | 14.1 C | 46.1 % | 1018.25 hPa | 0 | 0 |
| 1795087469 | 13.9 C | 46.11 % | 1017.75 hPa | 0 | 0 |
| 1795086865 | 13.6 C | 47.57 % | 1018.25 hPa | 0 | 0 |
| 1795086261 | 13.4 C | 47.99 % | 1019.63 hPa | 0 | 0 |
| 1795085657 | 13.7 C | 47.25 % | 1018.38 hPa | 0 | 0 |
| 1795085053 | 13.3 C | 48.34 % | 1017.75 hPa | 0 | 0 |
| 1795084449 | 13.1 C | 49.05 % | 1017.25 hPa | 0 | 0 |
| 1795083845 | 13.2 C | 49.09 % | 1016.75 hPa | 0 | 0 |
| 1795083241 | 12.3 C | 51.57 % | 1018.5 hPa | 0 | 0 |
| 1795082637 | 12 C | 51.87 % | 1018.88 hPa | 0 | 0 |
| 1795082033 | 11.8 C | 52.58 % | 1017.63 hPa | 0 | 0 |
| 1795081429 | 11.9 C | 52.76 % | 1018 hPa | 0 | 0 |
| 1795080825 | 12 C | 53.15 % | 1016.63 hPa | 0 | 0 |
| 1795080221 | 12 C | 52.86 % | 1017.88 hPa | 0 | 0 |
*Used Equation Coefficients:
Celsius: 0, 0.1, -50
Rel_Hum: 0, 0.01, 0
Atm_Press: 0, 0.125, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)