This is the latest recevied telemetry packets stored in our database for station/object SP2KDS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1795113280 | 6 Count | 311 Count | 0 Count | 0 VDC | 0 VDC |
| 1795111479 | 5 Count | 272 Count | 0 Count | 0 VDC | 0 VDC |
| 1795109679 | 4 Count | 228 Count | 0 Count | 0 VDC | 0 VDC |
| 1795107878 | 3 Count | 175 Count | 0 Count | 0 VDC | 0 VDC |
| 1795106078 | 2 Count | 133 Count | 0 Count | 0 VDC | 0 VDC |
| 1795104277 | 1 Count | 87 Count | 0 Count | 0 VDC | 0 VDC |
| 1795102476 | 0 Count | 38 Count | 0 Count | 0 VDC | 0 VDC |
| 1795100676 | 59 Count | 1042 Count | 43 Count | 0 VDC | 0 VDC |
| 1795098875 | 58 Count | 1000 Count | 43 Count | 0 VDC | 0 VDC |
| 1795097075 | 39 Count | 904 Count | 25 Count | 0 VDC | 0 VDC |
| 1795095274 | 13 Count | 798 Count | 0 Count | 0 VDC | 0 VDC |
| 1795093473 | 12 Count | 671 Count | 0 Count | 0 VDC | 0 VDC |
| 1795091672 | 11 Count | 625 Count | 0 Count | 0 VDC | 0 VDC |
| 1795089872 | 10 Count | 572 Count | 0 Count | 0 VDC | 0 VDC |
| 1795088071 | 9 Count | 507 Count | 0 Count | 0 VDC | 0 VDC |
| 1795086270 | 8 Count | 456 Count | 0 Count | 0 VDC | 0 VDC |
| 1795084470 | 7 Count | 415 Count | 0 Count | 0 VDC | 0 VDC |
| 1795082669 | 6 Count | 370 Count | 0 Count | 0 VDC | 0 VDC |
| 1795080869 | 5 Count | 317 Count | 0 Count | 0 VDC | 0 VDC |
| 1795079067 | 4 Count | 269 Count | 0 Count | 0 VDC | 0 VDC |
| 1795077267 | 3 Count | 229 Count | 0 Count | 0 VDC | 0 VDC |
| 1795075466 | 2 Count | 179 Count | 0 Count | 0 VDC | 0 VDC |
| 1795073665 | 1 Count | 138 Count | 0 Count | 0 VDC | 0 VDC |
| 1795071865 | 0 Count | 56 Count | 0 Count | 0 VDC | 0 VDC |
| 1795070064 | 28 Count | 1006 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)