This is the latest recevied telemetry packets stored in our database for station/object K3ORB-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795114638 | 427 | 632 | 0 | 0 | 0 |
| 1795114519 | 428 | 631 | 0 | 0 | 0 |
| 1795114399 | 428 | 631 | 0 | 0 | 0 |
| 1795114279 | 427 | 631 | 0 | 0 | 0 |
| 1795114160 | 428 | 631 | 0 | 0 | 0 |
| 1795114040 | 428 | 630 | 0 | 0 | 0 |
| 1795113920 | 429 | 630 | 0 | 0 | 0 |
| 1795113801 | 429 | 630 | 0 | 0 | 0 |
| 1795113561 | 430 | 629 | 0 | 0 | 0 |
| 1795113202 | 429 | 629 | 0 | 0 | 0 |
| 1795113082 | 430 | 629 | 0 | 0 | 0 |
| 1795112963 | 427 | 628 | 0 | 0 | 0 |
| 1795112843 | 443 | 628 | 0 | 0 | 0 |
| 1795112484 | 484 | 627 | 0 | 0 | 0 |
| 1795112005 | 486 | 626 | 0 | 0 | 0 |
| 1795111766 | 486 | 626 | 0 | 0 | 0 |
| 1795111646 | 485 | 626 | 0 | 0 | 0 |
| 1795111527 | 485 | 626 | 0 | 0 | 0 |
| 1795111407 | 486 | 626 | 0 | 0 | 0 |
| 1795111288 | 485 | 626 | 0 | 0 | 0 |
| 1795111168 | 486 | 626 | 0 | 0 | 0 |
| 1795110570 | 484 | 625 | 0 | 0 | 0 |
| 1795110091 | 457 | 623 | 0 | 0 | 0 |
| 1795109493 | 483 | 624 | 0 | 0 | 0 |
| 1795109373 | 483 | 623 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)