This is the latest recevied telemetry packets stored in our database for station/object VK7QF-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795095324 | 434 | 614 | 0 | 0 | 0 |
| 1795093527 | 433 | 614 | 0 | 0 | 0 |
| 1795091731 | 433 | 613 | 0 | 0 | 0 |
| 1795089935 | 434 | 614 | 0 | 0 | 0 |
| 1795088139 | 434 | 615 | 0 | 0 | 0 |
| 1795086342 | 433 | 616 | 0 | 0 | 0 |
| 1795084545 | 433 | 617 | 0 | 0 | 0 |
| 1795082748 | 434 | 618 | 0 | 0 | 0 |
| 1795080952 | 433 | 619 | 0 | 0 | 0 |
| 1795079155 | 434 | 621 | 0 | 0 | 0 |
| 1795077357 | 434 | 622 | 0 | 0 | 0 |
| 1795075560 | 434 | 624 | 0 | 0 | 0 |
| 1795071966 | 433 | 627 | 0 | 0 | 0 |
| 1795070168 | 434 | 628 | 0 | 0 | 0 |
| 1795064775 | 434 | 633 | 0 | 0 | 0 |
| 1795062977 | 434 | 634 | 0 | 0 | 0 |
| 1795061180 | 434 | 634 | 0 | 0 | 0 |
| 1795059382 | 433 | 635 | 0 | 0 | 0 |
| 1795057584 | 434 | 636 | 0 | 0 | 0 |
| 1795053988 | 433 | 635 | 0 | 0 | 0 |
| 1795052189 | 433 | 634 | 0 | 0 | 0 |
| 1795048594 | 433 | 633 | 0 | 0 | 0 |
| 1795046796 | 433 | 630 | 0 | 0 | 0 |
| 1795044998 | 432 | 627 | 0 | 0 | 0 |
| 1795043201 | 433 | 622 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)