This is the latest recevied telemetry packets stored in our database for station/object VE7WNK-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1795063783 | 453 | 579 | 0 | 0 | 0 |
| 1795063723 | 456 | 578 | 0 | 0 | 0 |
| 1795063665 | 454 | 576 | 0 | 0 | 0 |
| 1795063660 | 453 | 576 | 0 | 0 | 0 |
| 1795063588 | 454 | 576 | 0 | 0 | 0 |
| 1795063544 | 454 | 572 | 0 | 0 | 0 |
| 1795063534 | 455 | 572 | 0 | 0 | 0 |
| 1795063505 | 455 | 572 | 0 | 0 | 0 |
| 1795063443 | 453 | 570 | 0 | 0 | 0 |
| 1795063421 | 454 | 569 | 0 | 0 | 0 |
| 1795063361 | 454 | 568 | 0 | 0 | 0 |
| 1795063343 | 456 | 567 | 0 | 0 | 0 |
| 1795063284 | 455 | 565 | 0 | 0 | 0 |
| 1795063224 | 454 | 564 | 0 | 0 | 0 |
| 1795053116 | 474 | 593 | 0 | 0 | 0 |
| 1795053102 | 474 | 593 | 0 | 0 | 0 |
| 1795053034 | 475 | 591 | 0 | 0 | 0 |
| 1795052969 | 473 | 590 | 0 | 0 | 0 |
| 1795052926 | 473 | 588 | 0 | 0 | 0 |
| 1795052917 | 473 | 588 | 0 | 0 | 0 |
| 1795052906 | 472 | 588 | 0 | 0 | 0 |
| 1795052889 | 473 | 588 | 0 | 0 | 0 |
| 1795052829 | 474 | 589 | 0 | 0 | 0 |
| 1795052624 | 470 | 589 | 0 | 0 | 0 |
| 1795052519 | 472 | 587 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)